How about your tile grout finished work? Do you need to rework it? This issue needs to be analyzed in detail based on the specific rollover situation.

Not all failed construction job of tile grout situations are suitable for rework, it is recommended that you should first find out the reason of the failure.

If there is a problem with the tiles themselves, such as the tiles are unevenly laid, the tiles are chipped and the porcelain has burrs, there is little point in reworking tile grout for the tiles, because the problem of uneven joints will still occur even if the gaps are refilled with tile grout.

If the construction process of tile grout is not done well, for example, the gaps are not cleaned thoroughly, resulting in black edges and bubbles between tiles. The tile grout lines are not pressed properly, resulting in uneven surfaces of the grouting. If these problems are serious, they can be reworked.

If the tile grout does not solidify after it is completed, this situation must require rework.

If you don’t like the gaps color of finished tile grout, or there is a color difference between the actual color and the selected color, you can consider reworking the tile grout.

Color overturning of tile grout can be avoided in advance. It is recommended that you test the color on a small area first when applying tile grout, and then proceed to large-scale construction area after confirming the color of tile grout is what you like.

Generally, the tile grout rollover is not particularly serious, it is not recommended to rework it, because there is a risk of damaging the tiles when removing tile grout sealant by blade knife, and the rework cost is high and it is expense.

If you decide to rework, be sure to find ZOCOO professional and experienced tile grout work master with warranty service to avoid recurrence of the problem.